Why Is Jacob’s Garage Door Repair Necessary?


Be sure to unplug your garage door opener before starting the repair so you don’t get an electric shock when working on your garage door. You’ll probably be standing on a pole, which is a terrible place to get an electric shock because you could fall off. When dealing with power tools, remember to wear protective glasses. Visit Jacob’s Garage Door Repair for more details.

Before contacting a specialist for garage door repair, review the following items:

1. Examine the metal tracks for flaws.

This simple garage door repair tip will sometimes resolve the issue quickly. Metal tracks are prone to dents and bumps. If you discover any such harm, use a wood block and a hammer to straighten the track.

2. Examine the Tracks’ Alignment

The door can not function properly if the tracks are not properly aligned. It’s not always necessary to unscrew the tracks; instead, try loosening the bolts or screws and tapping the tracks back into place. Check the alignment of the tracks with a level. You’ll be able to finish your garage door repair in no time if the tracks are properly aligned.

3. Make sure the tracks are clean and dry.

Even though it may seem obvious, the garage door sticking could be due to hardened dirt and old lubricant. In this scenario, your garage door repair can simply entail cleaning and drying the tracks. Regular cleaners can be used to clean the tracks.

4. Lubricate the Rollers and Tracks

Simply lubricating both the tracks and the rollers will solve the problem and allow you to complete your garage door repair quickly. You may use a lubricant spray or a silicon spray for lubrication. It’s probably best to lubricate the tracks after they’ve been cleaned. Lubrication is beneficial to any movable part.

5. Tightening the Bolts and Screws that are Loose

Bolts and screws are prone to loosening over time. Check all of the screws and bolts that are part of your door’s opening and closing process. It’s possible that simply tightening them would solve the issue. If you can’t tighten the screws because the holes have become loose, you can fill the holes with “wood filler” or bits of regular wood.